Finishing the Hull

1st layer Epifanes PU-DD Yacht Coating

2nd layer Epifanes PU-DD Yacht Coating

3rd layer Epifanes PU-DD Yacht Coating ...

 ... 5th layer Epifanes PU-DD Yacht Coating ...

... 7th and last layer Epifanes PU-DD Yacht Coating

The hull is covered by plastic foil in order to protect it during the following work on deck.

Primering the Hull

1st layer Epifanes Epoxy HB-Coat has been grinded ...

... and filled. Afterwards
2nd layer Epifanes Epoxy HB-Coat has been applied

3rd layer Epifanes Epoxy HB-Coat has been applied

3rd layer Epifanes Epoxy HB-Coat has been grinded and is preapared for next layer.

4th layer Epifanes PU-Primer has been applied

Installation of Batteries and Chargers

After the starboard berth-stowage has been painted, I started the installation of the first battery bank. Two battery-banks of 48 V, 50 Ah are planned. One on starboard and one on portside. The both charger units are mounted below the companionway.

Painted starboard berth-stowage

48 V, 50 Ah Starboard battery-bank in berth-stowage

48 V, 600 W starboard charger unit below companionway