This older photo from March shows the bold pattern for fixing the cabin hatch. The holes were drilled to 12 mm and filled with epoxy. |
The screws were fastened to the hatch frame together with brass screw ankers. To avoid epoxy impurity on hatch frame or window I protected vulnerable areas with tape and plastic foil. |
Detail: Screw with brass screw anker. To avoid that the screws stick with the screw anchors, I have lubricated them with vaseline. |
The hatch with the fastened screw ankers has been set into the epoxy filled holes. |
Detail: Hatch with the fastened screw ankers has been set into the epoxy filled holes. |
Hatch frame with screw ankers after epoxy has cured. |
Detail: Hatch frame with screw anker after epoxy has cured. |
Bore filled-up with epoxy |