 |
| This older photo from March shows the bold pattern for fixing the cabin hatch. The holes were drilled to 12 mm and filled with epoxy. |
 | |
| The screws were fastened to the hatch frame together with brass screw ankers. To avoid epoxy impurity on hatch frame or window I protected vulnerable areas with tape and plastic foil. |
 | ||
| Detail: Screw with brass screw anker. To avoid that the screws stick with the screw anchors, I have lubricated them with vaseline. |
 |
| The hatch with the fastened screw ankers has been set into the epoxy filled holes. |
 |
| Detail: Hatch with the fastened screw ankers has been set into the epoxy filled holes. |
 |
| Hatch frame with screw ankers after epoxy has cured. |
 |
| Detail: Hatch frame with screw anker after epoxy has cured. |
 |
| Bore filled-up with epoxy |
No comments:
Post a Comment